Call Today 609.588.0900

GRID Systems

GRIDS

AFTek GRID WeldingAFTek manufactures a full line of Resistor Control Stations (GRIDS), and the ONLY resistor controlled MIG welding system.

The patented AFTek Demand Pulse MIG Welding System can weld with any commercial solid wire and any commercial flux-core, including self-shielded wires which are made for constant voltage only operation. While the AFTek System is "Constant Current", the Demand Pulse Control simulates constant voltage in such a way that all the CV processes can be used. Exceptional performance with high nickel, stainless steel, aluminum, and of course, carbon steels.AFTek 80 Volt GRID

AFTek controls can be furnished in a variety of packages from stand-alone singles to racks of eight arcs with a single connector.

If you are looking for exceptional welds, give AFtek a call.

AFTek Resistor Control Stations are built with exclusive Edge-Wound Resistors, using a proprietary alloy of iron and aluminum. In normal use, the resistors are rust-resistant, and run cooler than most. Switches are the 80 Volt GRIDheaviest duty available, and nothing is spared to furnish you with the highest quality product of this kind. The MIG welding system uses simple electronic switches, with high capacity MOSFETS to pulse the output, but at current and voltage levels similar to "short-arc".

 







Part # Model Description
    Single Control Station
909001 HPHV80 Single Polarity with shroud "One Hander"
909002 80 volt 195amp Single polarity for frame (pack) installation
909030 80 volt 245 amp Single polarity for frame (pack) installation
909035 80 volt 295 amp Single polarity for frame (pack) installation
909040 80 volt 345 amp Single polarity for frame (pack) installation
909045 80 volt 395 amp Single polarity for frame (pack) installation
    Options for single control station
805025 Shroud Packaged Required if not in "PACK" or frame
805026 Dual Polarity packaged Front panel switch
990125 Tig Control Soft start tig control (lift Arc)
805027 Pipeliner Packaged Single Pulse module for "5P"
805028 Demand Pulse Mig pkg. Patented pulse, non-short MIG
    Twin control station/single polarity
910000 80 volt 195amp Twin Single polarity for frame (pack) installation
910012 80 volt 245 amp Twin Single polarity for frame (pack) installation
910020 80 volt 295 amp Twin Single polarity for frame (pack) installation
910075 80 volt 345 amp Twin Single polarity for frame (pack) installation
    Options for Twin control station
805025 Shroud Packaged Required if not in "PACK" or frame
990125 Tig Control Soft start tig control (lift Arc)
805035 Dual Polarity packaged Front panel switch
805036 Pipeliner Packaged Single Pulse module for "5P"

© Copyright Hotfoil-EHS. All Rights Reserved.
Site by CMS4i.