Call Today 609.588.0900

MV400

AFtek MVE400400 Ampere Multi-Process Welding Machine
Featuring Demand Pulse MIG, the NO SPATTER low heat input welding process for outstanding results on STAINLESS, GALVANIZED, INCONELS and other hard-to-weld materials, from 22 gauge to several inches. A NON SHORT-CIRCUITING, low heat input process that produces little or NO SPATTER!  Great results for thin, thin sheet metal, open root pressure welds in vessels and pipe, easiest 5G welds with GMAW, GTAW, or SMAW (5P). Easiest out of position welding you have ever seen! AFTEK! Replaces TIG! 


Key Benefits

  • All power sources rated 100% continuous duty (24 Arc volts)
  • Amperage range adjustable in 5A increments
  • 230/460 3 phase, other voltages available
  • Thermostatically controlled alarms on rectifier and transformer automatically shuts down power source in case of overheating
  • Units can be paralleled together for higher amperage output
  • Engineered for low mainenance
  • Three year warranty on power transformers, rectifiers, and current control resistors

SPECIFICATIONS


  • Model: MV400DPM
  • Rated Welding Current: 400A
  • Arc Voltage: 32A
  • Welding Current: 5A-445A
  • Open Circuit Voltage: 60 VDC
Power Frame Specifications

  • Input Voltage: 230/460/575 60Hz
  • Input Amp: 70/35/29
  • KVA: 28
  • KW: 24
  • Weight: 555 lbs.
If you have a question, inquiry, or would like product information, please fill out the following form and a Hotfoil-EHS representative will contact you promptly.
*Name: 
*Company 
*Email: 
*Phone 
*Comments: 
  * Required Field
 
 

© Copyright Hotfoil-EHS. All Rights Reserved.
Site by CMS4i.


HOME   |  ABOUT   |  SUPPORT   |  CONTACT